RKC INSTRUMENT COM-JH, Instruction Manual

Page: 122 / 128

APPENDIX
IMR01Y36-E2
116
Z-TIO Module Extended Object (0x65: 65Hex)
Object class
Attributes Not supported
Services Not supported
Object instance ( : 1 to 64)
Object instances 1 to 64 correspond to channels 1 to 4 of controllers (TIO modules of SRZ) 1
to 16.
If Get is made to the instance No. corresponding to the nonexistent controller No. in
communication items other than “unused,” “0” is read while no error occurs if set is made
(no data is written).
ID Description Get Set Type Value
Attributes 1 Comprehensive event state Yes No WORD Refer to P. 75
2 Logic output monitor Yes No WORD Refer to P. 75
3 Output distribution selection No No UINT Refer to P. 75
4 Output distribution bias Yes Yes INT Refer to P. 75
5 Output distribution ratio Yes Yes INT Refer to P. 75
6 Minimum ON/OFF time of proportioning
cycle
Yes Yes INT Refer to P. 75
7 Area soak time stop function No Yes INT Refer to P. 75
8 EDS mode (for disturbance 1) Yes Yes INT Refer to P. 75
9 EDS mode (for disturbance 2) Yes Yes INT Refer to P. 75
10 EDS value 1 (for disturbance 1) Yes Yes INT Refer to P. 75
11 EDS value 1 (for disturbance 2) Yes Yes INT Refer to P. 75
12 EDS value 2 (for disturbance 1) Yes Yes INT Refer to P. 75
13 EDS value 2 (for disturbance 2) Yes Yes INT Refer to P. 75
14 EDS transfer time (for disturbance 1) Yes Yes INT Refer to P. 76
15 EDS transfer time (for disturbance 2) Yes Yes INT Refer to P. 76
16 EDS action time (for disturbance 1) Yes Yes INT Refer to P. 76
17 EDS action time (for disturbance 2) Yes Yes INT Refer to P. 76
18 EDS action wait time (for disturbance 1) Yes Yes INT Refer to P. 76
19 EDS action wait time (for disturbance 2) Yes Yes INT Refer to P. 76
20 EDS value learning times Yes Yes INT Refer to P. 76
21 EDS start signal Yes Yes INT Refer to P. 76
22 Operation mode Yes Yes INT Refer to P. 76
23 Communication switch for logic Yes Yes WORD Refer to P. 76
24
Event 1 channel setting
Yes Yes INT Refer to P. 76
25 Event 2 channel setting Yes Yes INT Refer to P. 76
26 Event 3 channel setting Yes Yes INT Refer to P. 76
27 Event 4 channel setting Yes Yes INT Refer to P. 76
28 EDS transfer time decimal point position Yes Yes INT Refer to P. 76
29 Output average processing time for EDS Yes Yes INT Refer to P. 76
30 Responsive action trigger point for EDS Yes Yes INT Refer to P. 77
Continued on the next page.