3. MOUNTING
IMR01Y36-E2
10
3.4 Panel Mounting
1.
Pull down the mounting bracket (A) until locked and that a mounting hole appears.
2.
Prepare one mounting bracket per instrument (B) sold separately (KSRX-55) and then insert it in
the rear of the terminal board at top of the instrument until locked but a mounting hole does not
disappear.
3.
Mount each module directly on the panel with screws which are inserted in the mounting holes of
the top and bottom mounting brackets.
Recommended tightening torque: 0.3 N
⋅
m (3 kgf
⋅
cm)
The customer needs to provide the M3 size screws. Select the screw length that matches the
mounting panel.
(A) Pull down
(B) Insert
Mounting bracket
(Sold separately)
[KSRX-55]
Mounting
holes
Mounting dimensions
130.5
±
0.
2
M3
(Unit: mm)
