RKC INSTRUMENT COM-JH, Instruction Manual

Page: 118 / 128

APPENDIX
IMR01Y36-E2
112
Continued from the previous page.
ID Description Get Set Type Value
Attributes
118 Event 1 delay timer Yes Yes INT Refer to P. 60
119 Force ON of Event 1 action Yes Yes WORD Refer to P. 60
120 Event 2 type Yes Yes INT Refer to P. 60
121 Event 2 hold action Yes Yes INT Refer to P. 61
122 Event 2 interlock Yes Yes INT Refer to P. 61
123 Event 2 differential gap Yes Yes INT Refer to P. 61
124 Event 2 delay timer Yes Yes INT Refer to P. 61
125 Force ON of Event 2 action Yes Yes WORD Refer to P. 61
126 Event 3 type Yes Yes INT Refer to P. 62
127 Event 3 hold action Yes Yes INT Refer to P. 62
128 Event 3 interlock Yes Yes INT Refer to P. 62
129 Event 3 differential gap Yes Yes INT Refer to P. 62
130 Event 3 delay timer Yes Yes INT Refer to P. 63
131 Force ON of Event 3 action Yes Yes WORD Refer to P. 63
132 Event 4 type Yes Yes INT Refer to P. 63
133 Event 4 hold action Yes Yes INT Refer to P. 64
134 Event 4 interlock Yes Yes INT Refer to P. 64
135 Event 4 differential gap Yes Yes INT Refer to P. 64
136 Event 4 delay timer Yes Yes INT Refer to P. 64
137 Force ON of Event 4 action Yes Yes WORD Refer to P. 64
138 CT ratio Yes Yes INT Refer to P. 64
139 CT assignment Yes Yes INT Refer to P. 64
140 Heater break alarm (HBA) type Yes Yes INT Refer to P. 65
141 Number of heater break alarm (HBA) delay
times
Yes Yes INT Refer to P. 65
142 Unused No No UINT
⎯
143 Unused No No UINT
⎯
144 Unused No No UINT
⎯
145 Unused No No UINT
⎯
146 Hot/Cold start Yes Yes INT Refer to P. 65
147 Start determination point Yes Yes INT Refer to P. 65
148 Unused No No UINT
⎯
149 Unused No No UINT
⎯
150 SV tracking Yes Yes INT Refer to P. 65
151 MV transfer function
[Action taken when changed to Manual
mode from Auto mode]
Yes Yes INT Refer to P. 65
152 Control action Yes Yes INT Refer to P. 65
153 Integral/Derivative time decimal point
position
Yes Yes INT Refer to P. 65
154 Derivative action Yes Yes INT Refer to P.66
155 Undershoot suppression factor Yes Yes INT Refer to P. 66
156 Derivative gain Yes Yes INT Refer to P. 66
157 ON/OFF action differential gap (upper) Yes Yes INT Refer to P. 66
158 ON/OFF action differential gap (lower) Yes Yes INT Refer to P. 66
159 Action (high) at input error Yes Yes INT Refer to P. 66
160 Action (low) at input error Yes Yes INT Refer to P. 66
161 Manipulated output value at input error Yes Yes INT Refer to P. 66
Continued on the next page.