RiMO SiNUS iON, User And Maintenance Manual

Page: 95 / 148

Malfunctions and faults | 7
User and maintenance manual 95 / 148
Fault Possible cause Remedy Person responsible*
Charge release cable
disconnected/wire break Check cable from BMS to charg-
ing socket OS
Wire break Check load cable OP
Charger defective Check charger OS
No mains power Check power mains OP
Kart fails to drive SOC value 0 Check charge status OS
Drive sensor defective or
not connected Check cable connections from
drive sensor OS
Temperature outside
permissible range
(min./max.) Check temperatures of BMS and
cells OS
BMS fault Check BMS OS
No control connection to
main switch solenoid Check cable from BMS to main
switch solenoid OS
Fuse defective Check fuses F4, F5, F6 in control
cabinet OS
Main switch defective Check main switch and solenoid OS
Wire break Check load cable OP
Shutdown transponder
defective or not connect-
ed correctly Check shutdown transponder and
cable connections OS
No ENPO start connec-
tion Check ENPO cable connection OS
Motor fails to run Fuse defective Check fuse in control cabinet OS
Motor temperature sensor
defective Check temperature sensor OS
Cable disconnected/wire
break Check cable connections of motor OS
Engine sensor defective Check engine sensor by replacing it OS
Controller defective Check controller by replacing it OS