background image

1

WELCOME

Thank you for purchasing a Polaris vehicle, and welcome to our world-
wide family of Polaris owners. We proudly produce an exciting line of 
utility and recreational products. 
• Snowmobiles
• All-terrain vehicles (ATVs)

RANGER 

utility vehicles

• Victory motorcycles

We believe Polaris sets a standard of excellence for all utility and recre-
ational vehicles manufactured in the world today. Many years of experi-
ence have gone into the engineering, design, and development of your 
Polaris vehicle, making it the finest machine we’ve ever produced.

For safe and enjoyable operation of your vehicle, be sure to follow the 
instructions and recommendations in this owner’s manual. Your manual 
contains instructions for minor maintenance, but information about 
major repairs is outlined in the Polaris Service Manual and should be 
performed only by a Factory Certified Master Service Dealer (MSD) 
Technician.

Your Polaris dealer knows your vehicle best and is interested in your 
total satisfaction. Be sure to return to your dealership for all of your ser-
vice needs during, and after, the warranty period. 

We also take great pride in our complete line of apparel, parts and acces-
sories, available through our online store at www.purepolaris.com. Have 
your accessories and clothing delivered right to your door!

Summary of Contents for Sportsman 9921161










































































































































Reviews: