Checks and servicing during operation | 8
User and maintenance manual
125 / 148
8.2.4.1
Testing EMERGENCY-STOP function
Switching on the kart.
a)
Actuate the EMERGENCY-STOP button.
Actuating the EMERGENCY-STOP button must result in an immediate halt of all kart movements.
Repeat this test with all installed EMERGENCY-STOP devices.
8.2.4.2
Maintenance of safety devices
To ensure that the kart is safe to drive at all times, certain safety-relevant components must be replaced when
they reach the end of their service life.
To prevent damage to or failure of the safety system, replace these components without delay and perform a
function test of the respective safety circuit. In certain cases, additional components might need to be replaced.
Contact RiMO service department for advice.
See also
Contacting RiMO GERMANY GmbH & Co. KG [
8.2.4.3
Maintenance of battery cells/side box
Closing side box
Fig. 74:
Side box
1 Side box
5 Screw fittings
When closing the box, ensure that no cables are caught by the sharp edges or can come into contact with rotat-
ing parts. Tighten the screws of the lid with a torque of maximum 2 Nm.
2
2
1
2
