5 | Start-up
82 / 148
User and maintenance manual
Fig. 52:
Panelling/bodywork
1 Bodywork
2 Surround protection
–
Inspect the bodywork for cracks, deformation and loose fixtures. Eliminate all damage without delay.
–
Inspect all mounts and the
surround protection front mount for damage and proper fixture. Eliminate all
damage without delay.
5.4
Start-up after prolonged storage
To recommission the kart after prolonged storage, proceed as described for commissioning, with initial battery
charging/discharging as follows:
a)
Check all components for stiffness and make the necessary adjustments.
b)
Fully charge the kart batteries (100 %) until message "END" is displayed on the charger.
c)
Then discharge the batteries to approx. 70 % ± 5 %, for instance by driving the kart.
d)
Repeat this charging/discharging procedure.
e)
Then proceed as described for commissioning of the kart.
See also
1
1
1
2
2
