Start-up | 5
User and maintenance manual
75 / 148
g)
Push in the
drive switch to switch off the kart.
The
drive switch indicator is off.
h)
Switch off the
main switch.
i)
Exit the kart.
The accelerator and brake function tests have been successfully completed.
Checking wheels
See
Checking safety elements
See
NOTICE
Running in brakes
Running in or bedding in the brakes describes the process by which the brake pads
and brake discs are carefully bedded in so that they fit properly for maximum brake
effect. Bedding in the brakes prolongs the service life of the brake pads and discs.
Performing first test run
The accelerator and brake function tests have been successfully completed.
a)
Place the kart on a suitable, approved kart track.
b)
Take place on the driver seat.
c)
Switch on the
main switch and then pull out the drive switch.
The green indicators of the
main switch and the drive switch are lit.
d)
Carefully accelerate the vehicle and then drive a constant speed of approx. 10 km/h. Test the braking be-
haviour (including full braking), the steering and the general vehicle behaviour and response.
If you encounter any problems and for more information, see
department.
The first test run has been successfully completed.
See also
Technical documents/appendices [