Chapter 2 Front Panel Operation
RIGOL
User’s Guide for DSA800E Series
2-41
TG
Set the parameter related to the tracking generator (TG). The TG function is only
valid when your analyzer is DSA832E-TG.
TG
TG
is used to enable or disable the TG.
When the TG is enabled, a signal with the same frequency of the current sweep
signal will be output from the
[GEN OUTPUT 50Ω]
connector at the front panel.
The power of the signal could be set through the menu.
TG Level
Set the output power of the signal of the tracking generator.
You can use the numeric keys, the knob, or the arrow keys to modify the parameter.
For more details, please refer to "
".
Table 2-23 TG level
Parameter
Explanation
Default
-20 dBm
Range
-40 dBm to 0 dBm
Unit
dBm, -dBm, mV, uV
Knob Step
1 dBm
Arrow Key Step
10 dBm
TG Lvl Offset
Assign a certain offset to the output power of the TG when gains or losses occur
between the TG output and external device in order to display the actual power
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
