RIGOL
User’s Guide for DSA800E Series
3-7
1.
General PC software
Ultra Sigma
of
RIGOL
2.
Measurement & Automation Explore of NI (National Instrument Corporation)
3.
Agilent IO Libraries Suite of Agilent (Agilent Technologies, Inc.)
This section introduces in details how to use
Ultra Sigma
to send commands
through each kind of interface to control the analyzer. Please refer to Ultra Sigma
Help to install the software and the components required correctly. You can
download the latest version of the software from www.rigol.com.
1.
Remote Control via USB
1)
Connect the devices
Connect the analyzer (USB Device) with PC (USB Host) using a USB cable.
2)
Install the USB drive
As the analyzer is a USBTMC device, after you connect the analyzer to the
PC and turn both on (the analyzer will be configured as USB interface
automatically), the PC will display the "Found New Hardware Wizard".
Please install the "USB Test and Measurement Device (IVI)" driver
following the directions of the wizard. For the procedures, refer to
"
".
3)
Search for device resource
Start-up
Ultra Sigma.
The software starts searching for the analyzer
resources currently connected to the PC; or click
to search
manually.
4)
View the resource
The resources found are shown under the "RIGOL Online Resource"
catalog and the instrument model and USB interface information are also
displayed.
For example, DSA832E
(USB0::0x1AB1::0x0960::DSA8A134400008::INSTR).
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
