Rigol DSA800E Series, User Manual

Page: 133 / 221

RIGOL Chapter 2 Front Panel Operation
User’s Guide for DSA800E Series
2-84
Marker->
Set the other system parameters (such as center frequency and reference level)
using the current marker readings. Press
Marker-> to enable a marker
automatically if no marker is currently enabled.
Mkr->CF
Set the center frequency of the analyzer to the frequency of the current marker.

If Normal marker is selected, the center frequency will be set to the
frequency of the current marker.

If Delta , Delta Pair , or Span Pair marker is selected, the center frequency
will be set to the frequency of the Delta Marker.

The function is invalid in Zero span mode.
Mkr->Step
Set the center frequency step of the analyzer to the frequency of the current
marker.

If
Normal
marker is selected, the center frequency step will be set to the
frequency of the current marker.

If Delta , Delta Pair or Span Pair marker is selected, the center frequency
step will be set to the frequency of the Delta Marker.

The function is invalid in Zero span mode.
Mkr->Start
Set the start frequency of the analyzer to the frequency of the current marker.

If
Normal
marker is selected, the start frequency will be set to the frequency
of the current marker.

If Delta , Delta Pair or Span Pair marker is selected, the start frequency will
be set to the frequency of the Delta Marker.

The function is invalid in Zero span mode.
www.calcert.com sales@calcert.com 1.800.544.2843
0
5
10
15
20
25
30