Ricoh LD528, Operating Instructions Manual

Page: 51 / 140

D: DRIVERS PCL6 XP_VISTA MUI DISK1
The PCL 6 printer driver is installed in the language specified by your operating system.
8. Check the printer driver location, and then click [OK].
9. Click [Next >].
10. Click [Finish].
If the installation is successful, the icon of the machine connected to the "USB001" port is added to
the [Printers] window.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
• The number after "USB" varies depending on the number of printers that the computer is connected
to.
Windows XP, Windows Server 2003/2003 R2 - USB
• To install a printer driver, you must have Administrators privilege. Log on using an account that has
Administrators privilege.
When USB is first used, Found New Hardware Wizard starts, and USB Printing Support is installed
automatically.
If the printer driver is already installed and plug-and-play is enabled, the icon of the printer connected to
the "USB" port appears in the [Printers and Faxes] window.
The printer drivers can be installed from the CD-ROM provided with this machine.
If the printer driver is not already installed, follow the printer's plug-and-play instructions to install it from
the provided CD-ROM.
1. Check that the power of the machine is off.
2. Connect the machine to the computer using a USB cable.
Connect the USB cable firmly.
3. Turn on the power of the machine.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
4. In the Found New Hardware Wizard window, click [Install the software automatically
(Recommended)], and then click [Next >].
5. Insert the CD-ROM into the CD-ROM drive.
If Auto Run starts, click [Cancel], and then [Exit].
Installing the Printer Driver Using USB
49
1