manualshive.com logo in svg

Ricoh LD520CL, Operating Instructions Manual

Share
Download
Ricoh LD520CL Operating Instructions Manual Download Page 917

Using DHCP

You can use the printer in a DHCP environment. You can also register the printer NetBIOS name on a
WINS server when it is running.

• Printers that register the printer NetBIOS name on a WINS server must be configured for the WINS

server.

• Supported DHCP servers are Microsoft DHCP Server included with Windows 2000 Server, and

Windows Server 2003/2003 R2/2008, and the DHCP server included with NetWare.

• If you do not use the WINS server, reserve the printer's IP address in the DHCP server so the same IP

address is assigned every time.

• To use the WINS server, change the WINS server setting to “active” using the control panel.
• Using the WINS server, you can configure the host name via the remote network printer port.
• DHCP relay-agent is not supported. If you use DHCP relay-agent on a network via ISDN, it will result

in increased line charges. This is because your computer connects to the ISDN line whenever a packet
is transferred from the printer.

• If there is more than one DHCP server, use the same setting for all servers. The machine operates using

data from the DHCP server that responds first.

• DHCP servers can operate in an IPv6 environment, but they cannot be configured to allocate IPv6

addresses or obtain host names.

Using AutoNet

If the printer IPv4 address is not automatically assigned by the DHCP server, a temporary IP address starting
with 169.254 and not used on the network can be automatically selected by the printer.

• The IP address assigned by the DHCP server is given priority over that selected by AutoNet.
• You can confirm the current IPv4 address on the configuration page.
• When AutoNet is running, the NetBIOS name is not registered on the WINS server.

Using DHCP

247

7

Summary of Contents for LD520CL





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands