Ricoh LD520CL Operating Instructions Manual Download

Page: 181 / 956

Messages Displayed When Using the Facsimile

Function

This section describes the machine's main messages. If other messages appear, follow their instructions.

Message

Cause

Solution

"Authentication failed."

The entered login user name
or login password is not
correct.

Inquire the user administrator for the
correct login user name and login
password.

"Authentication failed."

The machine cannot perform
authentication.

Contact the administrator.

"Cannot detect original size.
Place original again, then
press Start key."

The machine failed to detect
the size of the original.

Place original again, and then press
[Start] key.

"Connection with LDAP
server has failed. Check the
server status."

A network error has occurred
and connection has failed.

• Try the operation once more. If the

message is still shown, the network
may be crowded.

• In [System Settings], under

[Administrator Tools], check the
settings of LDAP server. For details,
see "Programming the LDAP
server", Network and System
Settings Guide .

"Error occurred, and trans.
was cancelled."

• Original jammed during

Immediate Transmission.

• A problem occurred in

the machine, or noise
occurred on the
telephone line.

Press [Exit], and then send the
documents again.

"Exceeded max. number of
search results which can be
displayed. Max.:n"
(A figure is placed at n.)

The number of search results
has exceeded the maximum
number of items that can be
displayed.

Search again after changing the search
conditions.

Messages Displayed When Using the Facsimile Function

Summary of Contents for LD520CL























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LD520CL

Reviews:

Related manuals for LD520CL

Brands by name

Popular brands

Ricoh LD520CL, Operating Instructions Manual

Search results

Summary of Contents for LD520CL

Reviews:

Related manuals for LD520CL

Brands by name

Popular brands