Ricoh LD520CL, Operating Instructions Manual

Page: 916 / 956

Windows 2000 Server family computer, be sure to install it using the install mode. The following are
the two methods of installation using the install mode:
1. Use [Add/Remove Programs] in [Control Panel] to install SmartDeviceMonitor for Client.
2. Enter the following command in the MS-DOS command prompt:
CHANGE USER /INSTALL
To quit the install mode, enter the following command in the MS-DOS command prompt:
CHANGE USER /EXECUTE
MetaFrame's [Auto-creating client printers]
Using [Auto-creating client printers] can select a logical printer created by copying the client's local
printer data to the MetaFrame server. We strongly recommend testing this function in your network
environment before using it for your work.
• The settings for optional equipment will not be stored in the server after the equipment is
disconnected. The settings for optional equipment will be restored to its defaults each time the
client computer logs on to the server.
• When printing a large number of bitmap images or using the server in a WAN environment over
dial-up lines such as ISDN, printing may not be possible or errors may occur, depending on
data transfer rates.
MetaFrame's [Printer driver replication]
Using [Printer driver replication] can distribute printer drivers across all servers in a server farm. We
strongly recommend testing this function in your network environment before using it for your work.
• If the printer drivers are not properly copied, install them directly onto each server.
7. Appendix
246
7