Ricoh LD520CL, Operating Instructions Manual

Page: 220 / 956

Message Cause Solution
"Cannot detect the paper size
of the original. Specify the
scanning size." The set original was
misaligned. • Place the original correctly.
• Specify the scan size.
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the ADF triggers
the automatic original size
detection process. Lift the ADF by
more than 30 degrees.
"Cannot find "XXX" scanner
used for the previous scan.
"YYY" will be used instead."
("XXX" and "YYY" indicate
scanner names.) The main power switch of the
previously used scanner is not
set to "On". Check whether the main power switch of
the scanner used for the previous scan is
turned on.
"Cannot find "XXX" scanner
used for the previous scan.
"YYY" will be used instead."
("XXX" and "YYY" indicate
scanner names.) The machine is not connected
to the network correctly. • Check the previously used scanner
is connected to the network
correctly.
• Cancel the Personal Firewall of the
client computer. For details, see
Windows Help.
• Use an application such as telnet to
make sure SNMPv1 or SNMPv2 is
set as the machine's protocol. See
"Connecting the Machine" "Using
telnet", Network and System
Settings Guide .
• Select the scanner used for the
previous scan.
"Cannot specify any more
scanning area." The maximum number of
registerable scan areas has
been exceeded. The maximum number of scanning areas
that can be stored is 100. Delete
unneeded scanning area.
"Clear Misfeed(s) in ADF." A paper misfeed has
occurred inside the ADF. Remove jammed originals, and place
them again. For details, see p.83
"Removing Jammed Paper".
• Check whether the originals are
suitable to be scanned by the
machine.
5. Troubleshooting When Using the Scanner Function
78
5