Ricoh LD520CL, Operating Instructions Manual

Page: 75 / 956

• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed.
• When loading OHP transparencies, select [OHP (Transparency)] as the paper type for the bypass
tray. For details, see “Copying from the Bypass Tray”, Copy Reference .
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly,
or a misfeed might occur. Use A4 or 8
1
/
2
× 11 size transparencies, and specify their size. For
details, see Copy Reference and Printer and Scanner Reference .
• When you use OHP transparencies, fan them for each use.
• We recommend you load OHP transparencies and sheets of label paper and translucent paper one
by one. This prevents them becoming jammed inside the machine.
• Also, be sure to remove printed OHP transparencies and sheets of translucent paper one by one as
they are delivered. This prevents them sticking together.
• We recommend that you use a 4000ANSI lumen or brighter overhead projector to project OHP
transparencies.
• If multiple sheet feeding occurs, load sheets one by one.
• When you load label paper, set the paper direction to .
• Flatten out curled sheets before loading them.
• To print on envelopes from the bypass tray: select [System Settings], [Tray Paper Settings], and then,
for the [Paper Type: Bypass Tray] setting, specify [Envelope].
• To print on coated paper from Tray 1, Tray 2, or the bypass tray: select [System Settings], [Tray Paper
Settings], and then, for the “Paper Type” setting of the tray you want to print from, specify [Coated
Paper].
• To print on high-gloss coated paper from Tray 1, Tray 2, or the bypass tray: select [System Settings],
[Tray Paper Settings], and then, for the “Paper Type” setting of the tray you want to print from, specify
[Coated Paper: Gloss Print].
• Before loading coated or glossy sheets, be sure to fan them thoroughly. If sheets feed in together,
become jammed, or produce strange noises when delivered, load them one by one from the bypass
tray.
• When copying or printing onto letterhead paper, the paper placing orientation is different depends
on which function you are using. See “Orientation-fixed paper or two-sided paper”.
• If you load paper of the same size in two or more trays, the machine automatically shifts to the other
tray when the first tray in use runs out of paper. This function is called Auto Tray Switching. (However,
if the paper type of one tray is recycled or special paper, the settings of the other trays must be the
same for the Auto Tray Switching function to work.) This saves interrupting a copy run to replenish
paper when making a large number of copies. You can set the paper type of the paper trays under
Paper Type: Tray 1-4. See “System Settings”, Network and System Settings Guide . For the setting
procedure of the Auto Tray Switching function, see “Copier Features”, Copy Reference .
• When copying or printing onto prepunched paper, the copy/print speed is slower than usual.
Recommended Paper Sizes and Types
73
3