Ricoh LD520CL, Operating Instructions Manual

Page: 74 / 956

*1 The paper size is detected automatically.
*2 Select the paper size in System Settings. For details about Tray Paper Size: Tray 2-4, see “System Settings”,
Network and System Settings Guide .
*3 Enter the paper size using the number keys in System Settings. For details about Tray Paper Size: Tray 2-4, see
“System Settings”, Network and System Settings Guide .
*4 Press the [ ] key, and then select the paper size.
*5 Press the [ ] key, and then enter the paper size using the number keys.
*6 If you want to copy onto thick (105 g/m
2
, 28 lb. or heavier) paper, select [Thick Paper]. See “Copying from
the Bypass Tray”, Copy Reference .
*7 When loading paper, make sure the stack height does not exceed the limit mark of the paper tray. See “Loading
Paper” for more information.
*8 If you wish to copy onto OHP transparencies, select [OHP (Transparency)].
*9 It is recommended to place one sheet at a time.
Paper Thickness
Paper Thickness Metric version Inch version
Thin Paper 52 - 59.9g/m
2
14 - 15.9 lb.
Plain Paper 1 60 - 74 g/m
2
16 - 20 lb.
Plain Paper 2 74.1 - 90 g/m
2
20 - 24 lb.
Middle Thick 90.1 - 105 g/m
2
24 - 28 lb.
Thick Paper 1 105.1 - 169 g/m
2
28 - 45 lb.
Thick Paper 2 169.1 - 210 g/m
2
45 - 56 lb.
Thick Paper 3 210.1 - 256 g/m
2
56 - 68 lb.
• Certain types of paper produce noise when delivered. This noise does not indicate a problem and
print quality is unaffected. (Glossy paper and OHP transparencies can produce noise when
delivered.)
• When using translucent paper or label paper, make sure to select the appropriate paper type. For
details about Paper Type: Bypass Tray, see “System Settings”, Network and System Settings Guide
.
• When loading paper in the paper trays 1 - 2, and the lower paper trays, place the print side face
up.
• When loading paper in the bypass tray, place the print side face down.
• When you use the bypass tray, it is recommended to set the paper direction to .
3. Adding Paper
72
3