Ricoh G104 Service Manual Download Page 553

Page: 553 / 601

Overview

SM 6-3

G160/G161

G160/G

161

6.2.2 BOARD STRUCTURE

The EGB (Engine Board) controls machine functions along with the CTL (Controller). The

IOB (In/Out Board) controls input/output, drivers and input/output connections. The IOB is

part of the EGB expansion board.

You can only install two of the optional interface boards (IEEE1284, IEEE802.11b,

Bluetooth, USB Host and Gigabit Ethernet) at the same time. (You can not install

IEEE802.11b and Bluetooth at the same time.)

The controller connects to the EGB through the PCI Bus (Peripheral Component

Interconnect Bus).

1. EGB (Engine Board):

This controls the Engine, the controller interface, image processing, MUSIC (Mirror Unit for

Skew and Interval Correction), and input/output. MUSIC is also called Automatic Line

Position Adjustment).

2. IOB (Input/Output Board):

This controls input/output, and the interfaces with the optional units, and the operation

panel.

3. Controller:

CÓPIA NÃO CONTROLADA

Summary of Contents for G104


























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G104

Reviews:

Brands by name

Popular brands

Ricoh G104, Service Manual

Search results

Summary of Contents for G104

Reviews:

Brands by name

Popular brands