manualshive.com logo in svg

Ricoh G104, Service Manual

Share
Download
Ricoh G104 Service Manual Download Page 276

DEVELOPMENT 

 

G104 6-48 

SM 

6.6.4 DEVELOPMENT BIAS 

The high voltage supply board #2 supplies development bias to the development 
roller through the receptacle at the rear of each development unit. 
There are ac and dc bias voltages. The ac bias improves toner transfer to the drum. 
The machine automatically controls the dc bias, if automatic process control is 
enabled. However, if process control is turned off, (that is, if SP3-501-001 is set to 
1), the dc bias is the value stored in SP2212-001 to –009 (do not adjust in the field 
unless told to do this).  
 

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Summary of Contents for G104


























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands