Ricoh G104, Service Manual

Page: 146 / 601

SERVICE MODE TABLE
G104 5-30 SM
2251 [Manual Toner] Forced Toner Supply
2251 001 [K]
2251 002 [M]
2251 003 [C]
2251 004 [Y]
Manually executes toner supply for each
color.
2302 [Temp./Humidity] Temperature / Humidity Display
2302 001 Temperature Displays the temperature.
[-128 to 127 /
0 / 0.1 deg/step]
2302 002 Relative Humidity Display the relative humidity.
[0 to 100 /
0 / 0.1%RH/step]
2302 003 Absolute Humidity Display the absolute humidity.
[0 to 100 /
0 / 0.1 g/m
3
/step]
2302 004 Current Environ. Display the current environment.
[0 to 4 /
0 / 1/step]
0: LL, 1: ML, 2: MM, 3: MH, 4: HH
2303 [Envir. Correct.] Environment Correction
2303 001 Manual Correct. *EGB Manually sets the environment.
[0 to 5 /
0 / 1/step]
0: OFF, 1: LL, 2: ML, 3: MM, 4: MH, 5: HH
[EC Threshold] Environment Correction Threshold
(Humidity, Environment) A. Humidity: Absolute Humidity
2304
These SPs adjust the thresholds (absolute humidity) for each environment.
2304 001 A. Humidity: LL-MM *EGB [0 to 100 / 5.0 / 0.1 g/m3/step]
2304 002 A. Humidity: ML-MM *EGB [0 to 100 / 8.0 / 0.1 g/m3/step]
2304 003 A. Humidity: MM-MH *EGB [0 to 100 / 16.0 / 0.1 g/m3/step]
2304 004 A. Humidity: MH-HH *EGB [0 to 100 / 26.0 / 0.1 g/m3/step]
2306 [Vd Link Corre.] Vd Link Correction
2306 001 Setting *EGB Sets the Vd link correction.
[0 or 1 /
0 / -] Alphanumeric
0: Execute, 1: Not execute
2306 002 Correction Coef. *EGB Adjusts the Vd link correction coefficient.
[1.00 to 2.50 /
1.00 / 0.01/step]
2314 [Trans.Belt Bias] Transfer Belt Current at Process Control
2314 011 Process Cont. [K] *EGB Adjusts the transfer belt current at process
control for [K].
[0 to 60 /
15.0 / 0.1 µ A/step]
2314 012 Process Cont. [M] *EGB
2314 013 Process Cont. [C] *EGB
2314 014 Process Cont. [Y] *EGB
Adjusts the transfer belt current at process
control for [M, C, Y].
[0 to 60 /
12.5 / 0.1 µ A/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA