Ricoh G104, Service Manual

Page: 356 / 601

Service Call Conditions
G160/G161 4-22 SM
SC
[Level]
Symptom Possible Cause/Required Action
[06FF]: Detailed error code
[B]
The pipeline clock frequency
rate is different from the
prescribed value.
ƒ Defective CPU devices
ƒ Mode bit data error, which is used for
initializing CPU.
1. Replace the controller board.
[0702]: Detailed error code
[B]
The result when the program
is executed in the command
cache is different from
desirable value.
ƒ Insufficient CPU cache
ƒ
Insufficient memory process speed
1. Replace the controller board.
2. Replace the RAM DIMM.
[0709, 070A]: Detailed error code
[B]
Even you write the data in the
only cache of memory, the
data is actually written in
another area (not cache) of
memory.
ƒ Defective CPU devices
ƒ Incorrect SPD
ƒ Boot mode setting error
1. Replace the controller board.
2. Replace the RAM DIMM.
[0801, 0804, 0807, 0808, 0809, 80A]: Detailed error code
[B] An error occurs when
checking the TLB.
ƒ Defective CPU devices
1. Replace the controller board.
[4002-4005]: Detailed error code
[B] The calculation error in the
CPU occurs.
ƒ Defective CPU
1. Replace the CPU.
821 Self-Diagnostic Error: ASIC
ASIC error
[0B00]
[B]
The write-&-verify check error
has occurred in the ASIC.
ƒ Defective controller board
1. Replace the controller.
ASIC not detected
[0B06]
[B]
The ASIC of the I/O is not
detected.
ƒ ASIC (controller board defective)
ƒ Poor connection between North Bridge and
PCI I/F.
1. Replace controller board.
SHM register check error [0B10]
[B] Failed to initialize or could not
ƒ Defective bus connection
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA