Ricoh G104, Service Manual

Page: 403 / 601

Service Mode Table
SM 5-23 G160/G161
G160/G
161
1911 024 Simple Temp.:S2 *EGB
This SP controls when the temperature
reduction of SP1911-021 is done.
[0 to 500 / P2a: 30, P2b: 10 / 1 sheet/step]
1911 025 Duplex Temp. 1 *EGB
Adjusts the temperature reduction for duplex
printing.
[0 to 200 / 2 / 1°C/step]]
1911 026 Duplex Temp. 2 *EGB
[0 to 200 / 5 / 1°C/step]]
1911 027 Duplex Temp.: S1 *EGB
This SP keeps the target print temperature
for specified printouts with this SP in duplex
printing.
[0 to 500 / 80 / 1 sheet/step]
1911 028 Duplex Temp.: S2 *EGB
This SP controls when the temperature
reduction of SP1911-025 is done.
[0 to 500 / P2a: 20, P2b: 10 / 1 sheet/step]
1911 029 Duplex Temp.: S3 *EGB
This SP controls when the temperature
reduction of SP1911-026 is done.
[0 to 500 / P2a: 0, P2b: 15 / 1 sheet/step]
1911 040 Dec.Tmp Keep Time *EGB
Keeps the temperature reduction for the time
specified with this SP even the process
control interrupts the multiple printing job.
[0 to 500 / P2a: 0, P2b: 60 / 1 sec/step]
1912
[Fusing Rotat.] Fusing Unit Roller Rotation Control
Paper Type -> TC1: Thick paper 1, TC2: Thick paper 2, OHP, SP: Special, GL:
Glossy paper
Rotation *EGB
[0 or 1 / 1 / -]
0: Off 1: On.
1912 001
When the printer is in the ready condition, the nip between the hot roller and
pressure roller is in the same position. This may cause deformation of the
rollers. Therefore, a temporary rotation prevents this problem. SP 1912 001
turns this feature on or off. SP1912-003 and 004 control this rotation.
Pre-rotation: Fusing idling
Prerotat. Speed *EGB
[0 to 2 / 2 / -]
1912 002
Adjusts the speed of the fusing-unit rollers during fusing idling.
0: 1/3 regular speed, 1: Low speed, 2: Regular speed
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA