Ricoh G104, Service Manual

Page: 399 / 601

Service Mode Table
SM 5-19 G160/G161
G160/G
161
Paper Feed. Temp. *EGB
[0 to 30 / P2a: 5, P2b: 10 / 1/step]
1104 023
Adjusts the increase in the temperature of the fusing unit between the ready
condition and the start of paper feed at the start of a new job.
1st Add Time: LS [0 to 50 / 0 / 0.1 sec/step]
1104 024
For print jobs at low speed. If the interval between jobs is less than this setting,
then the temperature change (1104 025) for the first page of a new job is not
applied.
1st Add Temp. *EGB [0 to 20 / P2a: 2, P2b: 8 / 1°C/step]
1104 025
Adds this value to the basic fusing temperature, for the first page of a new job.
This extra temperature is necessary because when the printer starts the first
page, the fusing unit is not warm enough.
1st Temp. Maint. *EGB [0 to 50 / P2a: 15, P2b: 8 / 1 sec/step]
1104 026
Adjusts the time for maintaining the temperature change that is set with 1104
025.
1st Print Inter. *EGB [0 to 100 / P2a: 0.2, P2b: 0 / 0.1 sec/step]
1104 027
For print jobs at regular speed. If the interval between jobs is less than this
setting, then the temperature change (1104 025) for the first page of a new job
is not applied.
Paper Feed. Temp. *EGB [0 to 30 / 5 / 0.1 deg/step]
1104 028
Adjusts the increase in the temperature of the fusing unit between the ready
condition and the start of paper feed at the start of a new job (B/W mode).
1st PrtDecTmpTime *EGB [0 to 255 / P2a: 0, P2b: 3 / 1 sec/step]
1104 029
Adjusts the time for decreasing 1°C when the temperature decline to the target
printing temperature.
PreRot.Thre.Temp. *EGB
[0 to 255 / 20 / 1 deg/step]
1104 030
Adjusts the threshold temperature for the added idling rotation.
1st PrtDecTmpTime *EGB [0 to 255 / 2 / 1 sec/step]
1104 031
Adjusts the added idling rotation time. This SP is activated when the fusing
temperature does not reach the specified temperature with SP1104-30.
1105
[Fusing Temp.] Fusing Temperature
(Paper Type, Mode, Color, Process Speed)
Paper Type -> N: Plain paper 1, N2: Plain paper 2, TC: Thick, TN: Thin, SP:
Special, OHP, ENV: Envelope, GL: Glossy paper, TK2: Thick paper 2
Mode -> Simple [one-sided] or Duplex
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA