Ricoh G104, Service Manual

Page: 476 / 601

Service Mode Table
G160/G161 5-96 SM
3612 010 DEV.SetUp [M] *EGB
3612 011 DEV.SetUp [C] *EGB
3612 012 DEV.SetUp [Y] *EGB
3701
[Low Resolution] (Threshold, [Color])
SP 3701-001 controls if the pixel count is used in hybrid toner supply mode or
not. If this SP is ‘on’, it is used if the image coverage ratio for the page is below
a threshold value (if the coverage is above this ratio, then the TD sensor is
used). If this SP is ‘off’, then the TD sensor is always used.
SP3701-002 to 005 control the threshold values for the image coverage ratio.
3701 001 Low Resolution *EGB
[0 to 1 / 0 / -]
0: Off, 1: On
3701 002 Threshold: [K] *EGB
3701 003 Threshold: [M] *EGB
3701 004 Threshold: [C] *EGB
3701 005 Threshold: [Y] *EGB
[0 to 100 / 1 / 1%/step]
3721 [Low Resolution] Toner Refresh Mode Setting in Low Image Coverage Ratio
3721 001 Toner Refresh Mode *EGB
Enables or disables the toner refresh mode.
[0 or 1 / 0 / -]
0: On. 1: Off
3721 002 S: Toner Refresh *EGB
Toner refresh mode is done if the percentage
of pages that have low image coverage is
larger than this threshold value.
[0 to 50 / 20 / 1%/step]
3721 003 Toner refresh coef. *EGB
Toner refreshing coefficient: DFU
[0 to 100 / 100 / 1%/step]
3721 004 Interval Bk *EGB
3721 005 Interval Col *EGB
Specifies the interval of the process control at
low coverage printing.
[0 to 65535 / 0 / 1 sheet/step]
3731 [SUM.ImageArea]
3731 001 [Bk] *EGB
3731 002 [M] *EGB
3731 003 [C] *EGB
Displays the total coverage for each color
after the process control execution. This SP is
cleared when the process control is done.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA