Ricoh G104, Service Manual

Page: 469 / 601

Service Mode Table
SM 5-89 G160/G161
G160/G
161
3306 016 Coefficient 4: [Y] *EGB
3306 017 Coefficient 5: [K] *EGB
3306 018 Coefficient 5: [M] *EGB
3306 019 Coefficient 5: [C] *EGB
3306 020 Coefficient 5: [Y] *EGB
Adjusts the time of the toner supply in hybrid
control mode.
[0.10 to 5.00 / 0.80 / 0.01/step]
3401 [Toner End Detec] Toner End Detection
3401 001 *EGB
[0 or 1 / 0 / -]
0: Detected, 1: Not detected
3411 [Toner Near End] ([Color]) DFU
3411 001 Min. Print: [K] *EGB
3411 002 Min. Print: [Cl] *EGB
3411 003 Max. Print: [K] *EGB
3411 004 Max. Print: [Cl] *EGB
Minimum: This is the minimum number of
prints after the toner end sensor detects toner
end.
Maximum: For low image coverage, more
sheets can be printed. This sets the maximum
that can be printed after toner end is
detected.
[0 to 750 / 0 / 1/step] DFU
3411 005 Pixel: [K] *EGB
3411 006 Pixel: [Cl] *EGB
Adjusts the number of sheets (A4), which the
pixel area is converted into for the toner end
after detecting the toner near end.
[0 to 100 / 0 / 1 sheet/step]
3501 [Process Cont.] Process Control
3501 001 ON/ OFF *EGB
Sets the method of the process control.
[0 to 3 / 0 / 1/step]
0: Auto, 1: Fixed
2: Auto + LS, 3: Auto (Table fixed)
Do not use settings 2 and 3.
3511 [Pntr. Display] Process Control Table Display ([Color])
3511 001 [K] *EGB
3511 002 [M] *EGB
3511 003 [C] *EGB
Displays the current process control table for
each mode.
[1 to 30 / 15 / 1/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA