Ricoh G104, Service Manual

Page: 416 / 601

Service Mode Table
G160/G161 5-36 SM
2153 002 Process Control *EGB
Enables or disables the adjustment after
process control is done.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
2153 003 Initialization *EGB
Enables or disables the adjustment
immediately after the power is turned on
or when recovering from energy save
mode.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
2153 004 Data In *EGB
Enables or disables the adjustment
immediately after the machine starts to
receive print job data. The adjustment is
done if one of the conditions set with
SP2153-012, -013 and –015 is satisfied.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
2153 005 Cut In *EGB
Enables or disables the adjustment during
printing. The adjustment is done if one of
the conditions set with SP2153-012, -013
and –015 is satisfied.
[0 or 1 / 1 / -] Alphanumeric
0: No, 1: Yes
2153 006 Job End *EGB
Enables or disables the adjustment after
printing.
[0 or 1 / 0 / -] Alphanumeric
0: Off, 1: On
2153 008 Trans. Belt Speed 2 *EGB
Enables or disables the transfer belt
speed correction during the adjustment.
The transfer belt speed is affected by
changes in temperature. A change of the
transfer belt speed during the adjustment
causes color registration errors. This SP
keeps the transfer belt speed constant.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA