Ricoh G104, Service Manual

Page: 443 / 601

Service Mode Table
SM 5-63 G160/G161
G160/G
161
side.
[0 to 4 / 2.0 / 0.1 -KV/step]
2756 021 T.Roll2:nd *EGB
Adjusts the transfer roller current for 2nd
side.
[0 to 100 / P2a: 20.0, P2b: 15.0 / 0.1 -µA
/step]
2756 022 Separation: 2nd *EGB
Adjusts the discharge plate voltage for 2nd
side.
[0 to 4 / 2.0 / 0.1 -KV/step]
2771
[Special: [K]: LE] Transfer roller current and discharge plate voltage
correction for the leading edge area of special paper 3 in B/W mode
Paper Side: 1st or 2nd
2771 003 Separation *EGB
2771 007 T.Roll 2: 1st *EGB
2771 012 T.Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
from these SP's values. For example, "20%"
on the LCD actually means 100%.
2772
[Switch Timing] Switch timing from normal to leading edge, special paper 3
(Paper Type, Edge) Paper Type -> TN: Thin, TE: Trailing Edge
2772 002 T. Roll 2: Sp3: TE *EGB
[0 to 200 / 10 / 1 mm/step]
2772 003 Separation: TN: TE *EGB
[0 to 200 / 25 / 1 mm/step]
2773
[Special: [K]: TE] Transfer roller current and discharge plate voltage
correction for the trailing edge area of special paper 3 in B/W mode
Paper Side: 1st or 2nd
2773 003 Separation *EGB
2773 007 T.Roll 2: 1st *EGB
2773 012 T.Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
from these SP's values. For example, "20%"
on the LCD actually means 100%.
2774
[Switch Timing] Switch timing from normal to trailing edge, special paper 3
(Paper Type, Edge) Paper Type -> TN: Thin, TE: Trailing Edge
2774 002 T. Roll 2: Sp3: TE *EGB [0 to 200 / 10 / 1 mm/step]
2774 003 Separation: TN: TE *EGB
[0 to 200 / 30 / 1 mm/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA