Ricoh G104, Service Manual

Page: 408 / 601

Service Mode Table
G160/G161 5-28 SM
SP2-XXX (Drum)
[Color Regist.] Color Registration Correction
([Color], M: Main scan, S: Sub scan)
2101
You can adjust these SPs if the color registration is not good after the Line
Position Adjustment (also known as ‘MUSIC’) is done. The [K] value (-001) is
the standard value in the main scan adjustment. The values other than [k]
value are added to [K] value. So, [K] value normally does not need to be
adjusted in the main scan adjustment.
2101 001 [K]: M Regist. Dot *EGB
2101 002 [M]: M Regist. Dot *EGB
2101 003 [C]: M Regist. Dot *EGB
2101 004 [Y]: M Regist. Dot *EGB
Adjusts the side edge registration by a dot
for each mode.
[-128 to 127 / 0 / 1 dot/step]
2101 005 [K]: M Reg. SubD *EGB
2101 006 [K-M]: M Reg. SubD *EGB
2101 007 [K-C]: M Reg. SubD *EGB
2101 008 [K-Y]: M Reg. SubD *EGB
Adjusts the side edge registration by 1/16
dot.
[-15 to 15 / 0 / 1/16dot/step]
2101 013 [K-M]: S Reg. 600 *EGB
2101 014 [K-C]: S Reg. 600 *EGB
2101 015 [K-Y]: S Reg. 600 *EGB
2101 016 [K-M]: S Reg. 1200 *EGB
2101 017 [K-C]: S Reg. 1200 *EGB
2101 018 [K-Y]: S Reg. 1200 *EGB
[-128 to 127 / 0 / 1 line/step]
[Magnifi. Adj.] Magnification Adjustment
Color, M Magnifi.: Main scan magnification 2102
Adjusts the main scan magnification correction for each color.
2102 001 [K]:M Magnifi. *EGB
2102 002 [M]:M Magnifi. *EGB
2102 003 [C]:M Magnifi. *EGB
2102 004 [Y]:M Magnifi. *EGB
[-1.00 to 1.00 / 0.00 / 0.001 %/step]
2102 005 PLL *EGB
Adjusts the PLL (phase lock loop).
[-1.00 to 1.00 / 0.00 / 0.001 %/step]
2103 [Trim Adjust.] Erase Margin Adjustment
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA