Ricoh G104, Service Manual

Page: 176 / 601

ENGINE SERVICE MODE
G104 5-60 SM
5801 015 Clear UCS Setting *CTL Resets or deletes the UCS-related data.
5801 016 MIRS Setting Resets or deletes the MIRS-related data.
5801 017 CCS Resets or deletes the CSS-related data.
FA
5802 [Engine Free Run]
5802 001 Performs a free run on the printer engine.
NOTE:
1)
The machine starts free run in the same
condition as the sequence of A4/LT
printing from the 1st tray. Therefore,
paper should be loaded in the 1st tray, but
paper is not fed.
2)
The main switch has to be turned off and
on after using the free run mode for a test.
5803 [Input Check]
5.2.4
5804 [Output Check]
5.2.5
5807 [Destin. / Model] Destination Code / Model FA
5807 001 Destination Code *EGB [0 to 4 / 0 / 1/step] Alphanumeric
0: DOM, 1: OTHER, 2: ASIA
3: ERP. 4: USA
5807 002 Model *EGB [0 or 1 / 0 / -]
0: Pla (G104), 1: Plb (G105)
5808 [Destination] Destination Code Display
5808 001 Destin. Code Disp *EGB Displays the destination code.
[0 to 4 /
0 / 1/step] Alphanumeric
0: DOM, 1: OTHER, 2: ASIA
3: ERP. 4: USA
5810 [Fusing SC Reset]
5810 001 Resets a type A service call condition. Turn
the main power switch off and on after
resetting the SC code.
5811 [Serial No.] Machine Serial No. Setting
5811 001 Setting *EGB Sets the machine serial number. FA
5811 002 Display *EGB Displays the machine serial number.
5811 003 ID 2 Code Display *CTL Displays the ID 2 Code.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA