S76
Book Arrival Sensor
Detects the arrival of the bound book in the book buffer below the trimming unit.
S78
Book Buffer Tray HP Sensor
Detects the home position (forward) of the book collection buffer tray. The book buffer tray
retracts to the rear to allow the book to fall onto the output tray.
S79
Book Lift Tray HP Sensor
Detects the home position (down) of the book lift tray. The book lift tray is raised to receive
the book from the trimming unit above and lower it into the book buffer.
S80
Book Tray HP Sensor
Detects the home position of the book output tray.
S81
Book Output Tray Sensor
Detects the presence of a book on the book output tray.
S98
Book Door Sensor
Detects when the door of the book stacker unit is opened or closed.
S99
Trimmings Box Sensor
Detects the presence or absence of the trimmings box. Triggers an alert if the box is not
installed.
S102
Book Lift Tray Lock Sensor
Detects rotation of the book lift tray motor (M38) which raises and lowers the book lift tray
that lowers the book from the trimming unit to the book buffer.
SOL5
Book Stacker Lock Solenoid
Operates the lock of the book door. Energizes and locks the book door while the machine
is operating. This is a safety feature.
6. Details
480
6
Summary of Contents for D391
