Ricoh D391, Service Manual

Page: 296 / 490

Error Name Error Details
Error Information
Sequence 1-4 Sequence 5-8
LED2 LED3 LED2 LED3
Cutter, Signature Grip
Motors
Main grip unit did not leave the HP
position.
10 1
8 1
Main grip unit did not arrive at the
HP position after signature release.
8 2
Grip end sensor did not detect
operation end.
8 3
Grip unit did not reach the grip end
sensor.
8 4
Cutter, Trimmings
Buffer Motors
Trimmings buffer did not leave the
HP position on the left.
10 2
8 1
Trimmings buffer did not reach the
HP position on the left.
8 2
Trimmings buffer did not leave the
trimmings dump port.
8 3
Trimmings buffer did not reach the
trimmings dump port.
8 4
The motor is not rotating. 8 5
Trimmings buffer did not retract
from the paper press plate sensor.
8 6
Trimmings buffer did not reach the
paper press plate sensor.
8 7
Book Buffer Tray, Book
Tray/Motor
Buffer tray did not move toward the
rear.
10 3
8 1
Buffer tray did not move toward the
front.
8 2
4. Troubleshooting
294
4