Ricoh D391, Service Manual

Page: 246 / 490

SW2
1 2 3 4 5 6 7 8
* Up * * Up Up * *
2. Set the SW2 bank as shown above.
3. Push [PSW1] then look at LED1, LED2, LED3 to read the current setting.
4. Input a value for the "CV-LNG" on the factory setting data sheet by pushing [PSW2] to add 0.1 mm
to the current value or [PSW3] to subtract 0.1 mm from the current value.
15. 10RGT-1
Square Cut Adjustment, L1:Square Adj. For 10-Sheet Signature 1
SW1
1 2 3 4
Up * * *
1. Set the SW1 bank as shown above.
SW2
1 2 3 4 5 6 7 8
Up Up * * Up Up * *
2. Set the SW2 bank as shown above.
3. Push [PSW1] then look at LED1, LED2, LED3 to read the current setting.
4. Input a value for the "10RGT-1" on the factory setting data sheet by pushing [PSW2] to add 0.1 mm
to the current value or [PSW3] to subtract 0.1 mm from the current value.
16. 10RGT-2
Square Cut Adjustment, L2:Square Adj. For 10-Sheet Signature 2
SW1
1 2 3 4
Up * * *
3. Replacement and Adjustment
244
3