
Bookbinding Delivery Exit
Paper sent from the host machine enters the bookbinder at the entrance rollers [1]. The entrance junction
gate solenoid turns ON and lowers the entrance junction gate [2] to guide paper to the signature path [3].
As each sheet arrives on the stacking tray [4], the sides and trailing/leading edges are jogged by side
fences and positioning rollers to align the signature (stack) for binding.
One cover sheet feeds from the inserter mounted on top of the bookbinder through the vertical transport
path [5] and comes to rest below the signature and on top of the cover registration unit [6].
After the last sheet is fed to the stacking tray, the aligned signature (stack) is clamped in the sub grip [7]
and passed to the main grip [8] that positions the signature for gluing in the gluing unit [9]. The main grip
holds the signature as it is glued and then pushes the glued edge into center of the cover below. The sides
of the cover fold up around the signature as it is lowered to form the book at [10].
Next, the book descends to the trimming unit [11] where the top, bottom, and fore edges of the book are
trimmed.
Finally, the trimmed book is lowered into the book tray buffer and output to the stacking tray [12].
Basics
373
6
Summary of Contents for D391
