Ricoh D391, Service Manual

Page: 360 / 490

3. Remove the Service Board cover of the bookbinder.
4. On the SW1 bank set DIP SW1 to ON.
1. Remove the rear cover of the inserter (

x2).
2. On the inserter control board set the DIP SWs as shown above.
3. Turn on the host machine.
4. Push and release SW2 to start the operation of each motor.
Press What Happens
1
Push [SW2]. Starts Drive Switch Motor (M2 (INS)), rotates the pinion gear that moves
the rack with the main drive gear of the tray feed motor to the front to engage the
drive roller of Tray A and stops.
2
Push [SW2] to run Tray Feed Motor (M1 (INS)) at 250 mm/s for Tray A, press [SW2]
to stop.
3
Push [SW2] to run Tray Feed Motor (M1 (INS)) at 500 mm/s for Tray A, press [SW2]
to stop.
4
Push [SW2] to run Tray Feed Motor (M1 (INS)) at 1100 mm/s for Tray A, press
[SW2] to stop.
5
Push [SW2]. Starts Drive Switch Motor (M2 (INS)), rotates the pinion gear that moves
the rack with the main drive gear of the tray feed motor to the rear to engage the drive
roller of Tray B and stops.
6
Push [SW2] to run Tray Feed Motor (M1 (INS)) at 250 mm/s for Tray B, press [SW2]
to stop.
7
Push [SW2] to run Tray Feed Motor (M1 (INS)) at 500 mm/s for Tray B, press [SW2]
to stop.
8
Push [SW2] to run Tray Feed Motor (M1 (INS)) at 1100 mm/s for Tray B, press
[SW2] to stop.
9
Push [SW2] to run Vertical Transport Motor (M5 (INS)) at 1100 mm/s, press [SW2]
to stop.
4. Troubleshooting
358
4