Ricoh D391, Service Manual

Page: 93 / 490

8. Turn the host machine on.
• Wait about 30 sec.
• Make sure that you hands and tools are well clear of the parts inside the machine.
9. Slowly push [PSW1] 11 times.
• Each push on the [PSW1] moves a unit to its shipping position (see table below).
• After each push LED2 flashes until the task has been completed. Wait for LED2 to go off before
you press [PSW1] again.
No. Operation Target Unit
1
• Moves the blade cradle to its initial position.
• Moves the signature press blade to its END position.
• Moves inside the trimming unit.
• Opens the rotation guide plate.
• Lowers the slide to mechanical stopper.
Trimming Unit
(This requires more time.
Wait for LED2 to go OFF
before pressing [PSW1]
again.
2 Closes the rotation guide plate. Cutter Rotation Unit
3 Moves the trimmings buffer into the machine. Trimmings Unit Cutter
4 Lowers the sub gripper, signature gripper. Sub Grip Unit
Preparing the Bookbinder for Moving
91
1