Ricoh A230, Service Manual, Page: 931 / 1134

SM A203/A231/A232
18-9
4.3 ”INVALID DYNAMIC LINK CALL FROM
SWAPENUM…
”
ERROR
A blue screen error with a message “Invalid dynamic link call from SwapEnum to
device xxxx service x” may happen, if SwapFTL software was installed before
SwapBox had been activated.
Once this happens, follow the procedure below.
1. Uninstall SwapFTL (choose “SwapFTL Uninstall” from “SCM SwapFTL”
program menu).
2. Reboot the computer.
3. After Windows has restarted, double-click “System” icon in the Control Panel.
4. Choose “Device Manager” tab and double-click “SCM SwapBox” in the
“PCMCIA sockets” category.
5. If the device was not activated, activate it.
6. Reboot the computer.
7. After Windows has restarted, re-install SwapFTL.
4.4 SWAPFTL PROBLEM WITH NOTEBOOK COMPUTERS
4.4.1 WINDOWS AND PC CARD DRIVER VERSION
Before installing the SwapFTL software into a notebook computer, ensure the
following.
•
Windows 95 OSR2 is installed or Service Pack 1 is installed.
For how to identify the version of Windows 95, refer to section 1.4 for details.
•
The latest PC Card driver is installed.
Contact your computer manufacturer or PC Card controller vender.
4.4.2 SYSTEM SUMMERY
If you still have problems after updating Windows and the drivers, send your
computer’s system summary to the support database.
To prepare the system summary as a PostScript file, do the following.
1. Install a PostScript printer (e.g., HP LaserJet 4 PS).
2. Double-click the “System” icon in the Control Panel.
3. Choose the “Device manager” tab, and select “Computer” in the device map.
4. Click the “Print” button.
5. Choose the PostScript printer using the “Setup” button, choose “All devices and
system summary” as the report type, and check the “Print to file” box.
6. Click OK to make a PostScript print file.
SwapBox

And
SwapFTL

TROUBLESHOOTING