Ricoh A230 Service Manual Download Page 736

Page: 736 / 1134

Serv

SERVICE LEVEL FUNCTIONS

4-11

A230/A231/A232

4.1.19 DTMF TEST (FUNCTION 11)

1. Enter the fax service mode.

2. Press

3. Press one of the following numbers:

– DTMF test (analog line)

– DTMF test (ISDN line)

NOTE: A G4 interface is required to test

DTMF tones on an ISDN line.

4. Press

5. Choose a DTMF signal type at the

keypad, then press

To stop the test, press

4.1.20 MODEM SIGNAL DETECTION TEST (FUNCTION 11)

NOTE:

V.8 and V.34 signal detection tests are not available.

1. Enter the fax service mode.

2. Press

3. Press one of the following numbers, as

required:

– G3 CCU Tests

– 1 G3 CCU Tests

NOTE: An optional G4 interface is

required to test a modem signal
on an ISDN line.

5. Press

6. Choose the modem signal type to be

detected at the keypad, then press

To stop the test, press

7. Exit the service mode.

A233M529.tif

A233M530.tif

A233M535.tif

A233M529.tif

A233M530.tif

A233M536.tif

Summary of Contents for A230















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for A230

Reviews:

Ricoh A230, Service Manual, Page: 736 / 1134

Search results

Summary of Contents for A230

Reviews: