Ricoh A230, Service Manual, Page: 227 / 1134

SERVICE PROGRAM MODE
4-18
A230/A231/A232 SM
Mode No.
Class 1
and 2
Class 3
Function Settings
3-001* 2* ID Sensor Initial
Setting Performs the ID sensor initial setting.
The ID sensor output for the bare drum
(V
SG
) is adjusted to 4.0
±
0.2V.
1: Start
This SP mode should be performed
after replacing or cleaning the ID sensor
or replacing the drum or doing an
NVRAM clear.
1
ID Sensor Output
Display Displays the current V
SG
and V
SP
output.
V
SP
=
x.xx V
2 ID Sensor Output
– V
SG
If the ID sensor does not detect the ID
pattern, "V
SP
=5.0V/V
SG
=5.0V" is
displayed and an SC code is generated.
V
SG
=
x.xx V
3-103 *
3 ID Sensor Output -
V
SDP
If the ID sensor does not detect the
bare area of the drum,
"V
SP
=0.0V/V
SG
=0.0V" is displayed and
an SC code is generated.
V
SDP
=
x.xxV
3-903* Initialization at
Power-up Decides whether or not the machine is
initialized (drum cleaning, charge roller
H.P check, charge roller voltage
correction, etc) at power-up. 0: Yes
1: No
If set to “1”, the fusing idling mode is
disabled regardless of the setting of
SP1-103.
4-008 * Main Scan
Magnification
(Scanning) Adjusts the magnification in the main
scan direction for scanning.
If this value is changed, the scanner
motor speed is changed. - 9.0 ~ + 9.0
0.1 %/step
+ 0.0 %
Use the
●
/
✽
key to toggle b
and -. See "Replacement and
Adjustment - Copy Adjustments" for
details.
4-010 * Leading Edge
Registration
(Scanning) Adjusts the leading edge registration for
scanning. - 9.0 ~ + 9.0
0.1 mm/step
+ 0.0 mm
(-): The image moves in the direction of
the leading edge
Use the
●
/
✽
key to toggle b
and -. See "Replacement and
Adjustment - Copy Adjustments" for
details.