Ricoh A230, Service Manual, Page: 767 / 1134

BIT SWITCHES
4-42
A230/A231/A232 SM
Printer Switch 0E
No FUNCTION COMMENTS
0 Paper size selection priority
0: Width
1: Length 0: A paper size which has the same width as
the received data is selected first.
1: A paper size which has enough length to
print all the received lines without reduction is
selected first.
1 Paper size selected for
printing A4 width fax data
0: 8 x 11” size
1: A4 size This switch determines which paper size is
selected for printing A4 width fax data, when the
machine has both A4 and 8” x 11” size paper.
2 Page separation
0: Enabled
1: Disabled 1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette,
the machine automatically prints the fax
message.
3
to
4
Printing the document image
on reports
Bit 4 Bit 3 Setting
0
0 The upper half
only
0 1 50% reduction
of sub scan
1 0 Same size
1 1 Not used
“Same size” means the document image is
printed at 100%, even if page separation
occurs.
5
to
6
Not used Do not change the settings.
7 Equalizing the reduction rate
among separated pages
(Page Separation)
0: Enabled
1: Disabled 0: When page separation has taken place, all
the pages are reduced with the same reduction
ratio.
1: Only the last page is reduced to fit the
selected paper size when the page separation
has taken place. Other pages are printed
without reduction.