Ricoh A230 Service Manual Download Page 53

Page: 53 / 1134

ELECTRICAL COMPONENT DESCRIPTIONS

Rev. 7/98

1-12

A230/A231/A232

1.6 ELECTRICAL COMPONENT DESCRIPTIONS

Refer to the electrical component layout on the point to point diagrams for the
locations of these components.

Symbol

Index
No.

Description

Note

Printed Circuit Boards
PCB1

BICU (Base
Engine & Image
Control Unit)

Controls all copier functions both directly
and through other control boards.

PCB2

PSU (Power
Supply Unit)

Provides dc power to the system and ac
power to the fusing lamp and optional
heaters.

PCB3

IOB
(Input/Output
Board)

Controls the mechanical parts of the
printer (excluding the paper feed section),
and the fusing lamp power.

PCB4

Paper Feed
Control (PFB)

Controls the mechanical parts of all paper
feed sections.

PCB5

High Voltage
Supply

Supplies high voltage to the drum charge
roller, development roller, and transfer
belt.

PCB6

SBU (Sensor
Board Unit)

Contains the CCD, and outputs a video
signal to the BICU board.

PCB7

SIB (Scanner
Interface Board)

Controls the scanner carriages and
passes signals from the scanner unit to
the BICU board.

PCB8

Operation Panel

Controls the LCD and LED matrix and
monitors the key matrix.

PCB9

Lamp Stabilizer

Provides dc power to the exposure lamp.

PCB10

LDDR (Laser
Diode Driver)

Controls the laser diode.

PCB11

SIFB (Scanner
Interface Board)

Passes signals between the SIB and
BICU boards.

Motors
M1

Main

Drives the main body components.

Scanner Drive

Drives the 1st and 2nd scanners.

Tray Lift

Raises the bottom plate in the paper tray.

Polygonal Mirror

Turns the polygonal mirror.

LD Positioning

Rotates the LD unit to adjust the LD
beam pitch when a different resolution is
selected.

Cooling Fan

Removes heat from the main PCBs.

Exhaust Fan

Removes heat from around the fusing
unit.

Summary of Contents for A230















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for A230

Reviews:

Ricoh A230, Service Manual, Page: 53 / 1134

Search results

Summary of Contents for A230

Reviews: