Ricoh A230, Service Manual, Page: 1082 / 1134

SERVICE PROGRAM MODE
A230/A231/A232 4-36 SM
Mode No.
Class 1
and 2
Class 3
Function Settings
-907 Plug & Play Brand
Name and
Production Name
Setting Selects the brand name and the
production name for Windows 95 Plug
& Play. This information is stored in the
NVRAM. If the NVRAM is defective,
these names should be registered
again.
After selecting, press the “Original
Type” key and
7
at the same time. If
the setting is completed, a “*” mark will
be displayed before the selection.
5-914
Printer Counter
Display Selects whether or not the total printer
counter is displayed in the UP mode. 0: No
1: Yes
5-915 Mechanical
Counter Detection Checks whether the mechanical
counter inside the inner cover is
connected or not. 0: Not
detected
1: Detected
2: Unknown
5-920* Recovery Time for
Low Power Mode The default recovery time is 20s
(machine temp. 145 to 157C). Since
recovery starts at a higher temperature
with this setting, it provides the machine
more leeway in reaching the ready
status temperature on time. 0: 20 s
1: 30 s
5-990 1 SMC Printing
(All Data) Prints all the system parameter lists.
See the "System Parameter and Data
Lists" section for how to print the lists. 1: Start
2 SMC Printing
(SP Mode Data) Prints the SP mode data list.
See the "System Parameter and Data
Lists" section for how to print the lists. 1: Start
3 SMC Printing
(UP Mode Data) Prints the UP mode data list.
See the "System Parameter and Data
Lists" section for how to print the lists. 1: Start
4 SMC Printing
(Machine Status
Data) Prints the machine status history data
list.
See the "System Parameter and Data
Lists" section for how to print the lists. 1: Start
5 SMC Printing
(UP Mode - Copy) Prints the Copy Mode list (UP Mode
No.10)
See the "System Parameter and Data
Lists" section for how to print the lists. 1: Start
6 SMC Printing
(Large Font Size) Prints the SP mode data list with a large
font size.
See the "System Parameter and Data
Lists" section for how to print the lists. 1: Start
This SP mode is used when the SMC
list is sent by fax to the number stored
with SP5-812.
⇒
Rev. 01/2000