manualshive.com logo in svg

Ricoh A230, Service Manual, Page: 829 / 1134

Share
Download
Ricoh A230 Service Manual Download Page 829

SRAM DATA BACKUP AND RESTORE

5-12

A230/A231/A232

SM

4. Press 

.

 

3

 then 

/

.

5. Press 

/

.

6. Press 

Start.

After the machine backs up the data to
the flash card, the message on the
right appears.

7.  Turn off the main power switch then disconnect the flash memory card.

8.  Turn the machine back on

The data in the flash card can be copied to a PC for safe keeping. This data can
then be uploaded from the PC to a flash memory card if the SRAM data has to be
restored later.

Refer to the SwapFTL manual for details.

5.5.2  SRAM RESTORE FROM A FLASH MEMORY CARD

This function recovers SRAM data if the FCU is replaced or SRAM data was lost
accidentally.

For how to restore the SRAM data from the backup on a flash memory card, refer
to section 5.3.3 for details.

A693R511.TIF

A693R536.TIF

A693R537.TIF

A693R538.TIF

Summary of Contents for A230















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments