Ricoh A230, Service Manual, Page: 744 / 1134

Serv
ic
e
Ta
b
le
s
A6
9
3
BIT SWITCHES
4-19
SM A230/A231/A232
G4 Communication Parameters
Compression
mode MMR: MMR compression
MR: MR compression
MH: MH compression
Resolution 21: Standard (200 x 100 dpi)
22: Detail (200 x 200 dpi)
44: Superfine (400 x 400 dpi) – optional PMU board required
Width and
reduction A4: A4 (8.3”), no reduction
B4: B4 (10.1”), no reduction
A3: A3 (11.7”), no reduction
Transfer T: Transfer
- : Other
Confidential C: Confidential
- : Other
Other parameters The following information is shown in 6-bit format. Bit 1 is the first
bit from the left, and bit 6 is at the right end.
Bit 1 - Smoothing
0: Enabled, 1: Disabled
(Smoothing is disabled in halftone mode.)
Bit 2 - CIL printing 0: Enabled, 1: Disabled
Bit 3 - Not used
Bit 4 - mm/inch conversion
0: Disabled, 1: Enabled
Bit 5 - Engine type 0: mm, 1: inch
Bit 6 - Resolution unit
0: mm, 1: inch
System Switch 01
No FUNCTION COMMENTS
0
Automatic Service Call
0: Disabled
1: Enabled This bit switch determines whether the machine
will send an Auto Service Call to the service
station when it is time for PM.
Cross reference
Auto service calls: Section 2.1
1-7
Not used Do not change the settings.