Ricoh A230, Service Manual, Page: 240 / 1134

SERVICE PROGRAM MODE
4-31
SM A230/A231/A232
Serv
ic
e
Ta
b
le
s
Mode No.
Class 1
and 2
Class 3
Function Settings
4-911 8 HDD Model Name
Display Displays the model name of the HDD.
If the hard disk is not installed, “Not
Connected” is displayed.
5-001 All Indicators On Turns on all indicators on the operation
panel. M/C: Stop
1: Start
Press “1” to check.
Press
#
to exit this SP mode.
5-009* Language
Selection Selects the language for the display.
After selecting the language, turn the
main power switch off and on.
5-024* mm/inch Display
Selection Selects what unit is used. 0: mm
1: inch
After selecting the unit, turn the main
power switch off and on.
5-104 * A3/11"x17"
Double Count Specifies whether the counter is
doubled for A3/11"x17" paper. 0: No
1: Yes
If "1" is selected, the total counter and
the current user code counter count up
twice when A3/11"x17" paper is used.
5-106 * ADS Level
Selection Selects the image density level that is
used in ADS mode. 1 ~ 6
1 notch /step
3
5-108 2 Board Erase in
Comb. Mode 0: 3mm
1: None
5-112* Non-standard
Paper Size Selects whether a non-standard paper
size can be input or not. 0: No
1: Yes
If “1” is selected, the customer will be
able to input a non-standard paper size
using a UP mode.
5-113* Optional Counter
Type This SP is for Japan only. Do not
change the value. 0 ~ 6
1/step
0
5-115* Duplex Punch
Hole Margin Selects whether or not the image on the
back of duplex copies shifts for making
the punch holes. 0: No
1: Yes-
5-118 * Disable Copying Selects whether the copy function is
disabled or not. 0: No
1: Yes
5-120 Mode Clear – Op.
Counter Removal This SP is for Japan only. Do not
change the value. 0 ~ 2
1/step
0
5-121* Counter Up
Timing Determines whether the optional key
counter counts up at paper feed-in or at
paper exit. 0: Feed-in
1: Exit
The total counter is not affected by this
SP mode.
5-127* APS Mode Selects whether the APS function is
enabled or not. 0: Yes
1: No