manualshive.com logo in svg

Ricoh A230, Service Manual, Page: 582 / 1134

Share
Download
Ricoh A230 Service Manual Download Page 582

SM

A203/A231/A232

18-10

4.5

COMPLETE UNINSTALL

If the SwapBox and the SwapFTL software do not work due to unsuccessful
configuration, the following process helps you to restart Windows plug and play
from the beginning.
This procedure uninstalls all the software and drivers that were installed for the
SwapBox, as well as deleting the Windows registry settings.

1.  Uninstall the SCM SwapFTL programs.

Choose “SwapFTL uninstall” from the Start menu.

2.  Delete the following files from the \Windows\System directory.

•

 SOCKETSV.VXD

•

 FLS2MTD.VXD

•

 FLS1MTD.VXD

•

 SRAMMTD.VXD

•

 CARDDRV.EXE

•

 CSMAPPER.SYS

•

 PCCARD.VXD

3.  Delete “SCM SwapBox Family Plug and Play PCMCIA Controller” from the

Windows device manager.
(Choose ‘System” from the Control panel to access the device manager.)

4.  Shutdown and restart Windows.

Windows starts the plug & play process again to install the SwapBox.

  TROUBLESHOOTING

Summary of Contents for A230















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments