Ricoh A230, Service Manual, Page: 804 / 1134

Serv
ic
e
Ta
b
le
s
A6
9
3
SERVICE RAM ADDRESSES
4-79
SM A230/A231/A232
4800A1(H) - User parameter switch 01 (SWUSR_01)
Bit 0: Label insertion home position
0: Disabled, 1: Enabled
Bit 1: ID transmission home position 0: Disabled, 1: Enabled
Bit 2: Automatic reduction (tx) home position 0: Disabled, 1: Enabled
Bits 3 and 4: Scanning mode LED home position
Bit 4 3 Setting
0 0 Text
0 1 Text/ Photo
1 0 Photo
1 1 Special Original (See Note below)
NOTE: “Special Original” setting is not explained in the Operator’s Manual,
because it can be selected only if System Switch 19 – bit 7 is set to “1”.
Bit 5: TTI print home position 0: Disabled, 1: Enabled
Bit 6: Not used
Bit 7: Settings return to home position after scanning
0: Disabled, 1: Enabled
4800A2(H) - User parameter switch 02 (SWUSR_02)
Bit 0: Forwarding mark printing on forwarded messages
0: Disabled, 1: Enabled
Bit 1: Center mark printing on received copies 0: Disabled, 1: Enabled
Bit 2: Reception time printing 0: Disabled, 1: Enabled
Bit 3: TSI print on received messages 0: Disabled, 1: Enabled
Bit 4: Checkered mark printing 0: Disabled, 1: Enabled
Bit 5: CIL printing (G4) 0: Disabled, 1: Enabled
Bit 6: TID printing (G4) 0: Disabled, 1: Enabled
Bit 7: Not used
4800A3(H) - User parameter switch 03 (SWUSR_03: Automatic report
printout)
Bit 0: Transmission result report (memory transmissions) 0: Off, 1: On
Bit 1: Not used
Bit 2: Memory storage report
0: Off, 1: On
Bit 3: Polling reserve report (polling reception) 0: Off, 1: On
Bit 4: Polling result report (polling reception) 0: Off, 1: On
Bit 5: Transmission result report (immediate transmissions) 0: Off, 1: On
Bit 6: Polling clear report 0: Off, 1: On
Bit 7: TCR (Journal) 0: Off, 1: On
4800A4(H) - User parameter switch 04 (SWUSR_04: Automatic report
printout)
Bit 0: Automatic confidential reception report output
0: Off, 1: On
Bits 1 to 6: Not used
Bit 7: Inclusion of a sample image on reports
0: Off, 1: On