Ricoh A230, Service Manual, Page: 741 / 1134

BIT SWITCHES
4-16
A230/A231/A232 SM
4.2 BIT SWITCHES
WARNING
Do not adjust a bit switch that is described as “Not used”, as this may
cause the machine to malfunction or to operate in a manner that is not
accepted by local regulations. Such bits are for use only in other areas,
such as Japan.
NOTE: Default settings for bit switches are not listed in this manual. Refer to the
System Parameter List printed by the machine.
4.2.1 SYSTEM SWITCHES
System Switch 00
No FUNCTION COMMENTS
0 Not used. Do not change the settings.
Technical data (optional)
printout on TCR/Journal
0: Disabled
1: Enabled 1: Instead of the personal name, the following
data are listed on the TCR/Journal for each G3
communication.
If enabled, bits 2 and 3 settings are ignored. 1
Result Pers. Name No.
File
--------------------------------------
OK 0023 34V34 264/264 L01A000001509
OK 000D V17 144/ 96 L00C000001510
Result Pers. Name No.
File
--------------------------------------
OK FFFF 32V34 /240 LFFFF09001502
File No.
Error lines (Low/high)
Rx level
Final modem rate
Starting modem rate
M o d u l a t i o n m o d e
Symbol rate (V.34 only)
E Q M v a l u e
<RX>
<TX>
P e r s o n a l C o d e
(Low/high)
A693M604.WMF
Notes:
The error lines field is not used.
EQM and Rx level are fixed at “FFFF” in TX mode.
Symbol rate is printed only for V.34 communications.