Ricoh A230, Service Manual, Page: 221 / 1134

SERVICE PROGRAM MODE
4-12
A230/A231/A232 SM
Mode No.
Class 1
and 2
Class 3
Function Settings
2-109* 8 Beam Pitch Data
Reset Resets the values of SP2-109-6 and
SP2-109-7. Press “1” to reset. 1: Start
After replacing the LD unit, this SP
mode must be done.
2-110 Image Resolution
Change Designer use only. Do not change
this value. 0: 400 dpi
1: 600 dpi
2: 15.4 x 16
3: 16 x 15.4
2-111* FCI Setting Select the FCI setting.
This SP affects copier mode only.
Designer use only. Do not change
this value. 0: Through
1: Edge
Smoothing
2: FCI On
(parameter 2)
3: FCI On
(parameter 1)
2-112* Polygon Motor Off
Timer Input the time that the polygon motor
turns off after entering the stand-by
condition. 0 ~ 60
1 s/step
10 s
If set at “0”, the polygon motor never
turns off during stand-by. However,
when the machine goes into energy
saver mode, the polygon motor turns off
regardless of this timer.
2-201 * 1 * Adjusts the development bias for
copying. Development Bias
Adjustment (for
copying)
This can be adjusted as a temporary
measure if faint copies appear due to
an aging drum.
200 ~ 700
10 V/step
600 V
2 * Adjusts the development bias for
making the ID sensor pattern for Vsp. Development Bias
Adjustment (for ID
sensor pattern)
This should not be used in the field,
because it affects ID sensor pattern
density, which affects toner supply.
200 ~ 700
1 V/step
380 V
2-207 Forced Toner
Supply Forces the toner bottle to supply toner
to the toner supply unit for 30 seconds.
Press “1” to start. 1: Start
Toner supply finishes automatically
after 30 seconds. This process is not
normally needed in the field for this
model.
2-208 * Selects the toner supply mode. Toner Supply
Mode
Use image pixel count mode only as a
temporary measure if the ID or TD
sensor is defective.
0: Sensor
1: Image Pixel
Count
2-209 * 1 Toner Supply Rate Adjusts the toner supply rate.
Increasing this value reduces the toner
supply clutch on time. Use a lower
value if the user tends to make lots of
copies that have a high proportion of
black.
10 ~ 800
5 mg/s / step
30 mg/s