Ricoh A085, Manual

Page: 424 / 617

Mode No. Function Data
•
91
User code Counter
Check
Displays the contents of each user code
counter. use the "+" and "–" ("up" and "down")
keys to select user code. (The last two digits of
the user code are displayed in the copy
counter.)
(User counters count from 0 to 999999.
Press "#" key to display the first three digits in
the three digit indicator.
Hold down "
•
" key to display the final three
digits.)
•
92
User Code
Counter Clear Resets counters of all the user codes (SP91).
(To reset, press "1" then the "#" key).
0: No
1: Yes
•
93 Copy Limit
Limits the maximum copy quantity that can be
entered. 1 – 999
999 = default
97
SC/Jam Counter
Clear
Clears all the service call and jam counters.
(To clear, press "1" then the "#" key.
Beeper sounds 3 times when this function is
used.) 0: No
1: Yes
98 Counter Clear
Clears the following counters:
- Operation Time (motor count only) (SP100)
- Copy/Original Counters (SP101)
- SC Counters (SP120)
- Jam Counters (SP130)
- PM Counter (SP88)
- User Code Counters (SP91)
- User Program
(To clear, press "1" then the "#" key.
Beeper sounds 4 times when this function is
used.)
0: No
1: Yes
99 Memory All Clear
Clears all counters and returns all modes to
the default setting.
(To access this mode turn on the main switch
while pressing both the "Clear Modes" and
"C/S" keys. Then enter "99" and press the "#"
key.
To clear, press "1" then the "#" key.
Beeper sounds 5 times when this function is
used.)
0: No
1: Yes
Service
Tables
12 February 1992 SERVICE PROGRAM MODE
4-21